Inlet Outlet Parts

This pre-filter foam is approximately 2-1/4" Diameter by 6" Length. The inner diameter measures 1-1/8" and will fit over many aquarium intake tubes for use as a pre-fi...

This pre-filter foam is approximately 2-1/4" Diameter by 7" Length. The inner diameter measures 1-1/4" and will fit over many aquarium intake tubes for use as a pre-fi...

The SmartHeater unviversal connection kit allows the SmartHeater to be used with other brands of external filters and replaces the intake tube supplied by the manufact...

Replacement tubing for the Rena XP Filters consists of two, 6.5 foot lengths. These are the original tubes that come with the XP4, but will also fit the XP1, XP2 and X...

Additional SmartFilter inlet extensions can be used to increase the intake length for use in deeper tanks.

This is the original strainer for the Rena SmartFilter and fits all models including SmartFilter model 20, 30 and 55. Replace if broken or lost to prevent clogging or ...

The outlet pipe connects the flexible tubing exiting from the filter to the outlet accessories which terminate with either the spraybar or power jet nozzle. This outle...

The power jet nozzle is used to direct the water discharged from the filter onto the water's surface. This increases agitation and aeration in the tank for better oxyg...

840135-00-Priming-Funnel-9-or-P The priming funnel is used on initial setups to prime the system for startup. It is only needed for the initial setup and when the inle...

840138-00 Suction Cup Clamps (4pk) (L) These brackets attach (clamp) to the inlet/outlet tubes and coupled with the large suction cups will hold the inlet/outlet pipe ...

The Quick Disconnect (QD) unit contains the integrated inlet/outlet system for the filter. The unit is removed by lifting the handle which releases the connection to t...

The flow control valve for the Rena Filstar XP canister filter regulates the flow from the filter into the aquarium. This is a simple "flapper valve" that when turned ...

The quick-disconnect Orings prevent leaking around the inlet and outlet stems of the Quick-disconnect unit when inserted into the top of the motor and when the filter ...

There are two outlet extensions included with the Rena Filstar XP Canister Filters. The taller outlet extension will extend the discharge outlet (spraybar or power jet...

There are two outlet extensions included with the Rena Filstar XP Canister Filters. The short extension will discharge water from the filter(spraybar or power jet) int...

This is a one-piece spraybar that securely attaches to the discharge tube or flow control valve. The spraybar discharges water into the aquarium more slowly than the p...

The inlet pipe allows the unit to be primed for the initial filter startup and if the filter needs to be re-primed after a major cleaning or teardown. Once primed, wat...

This is the complete inlet/outlet accessory tray that comes with the Rena Filstar XP external canister filter system. This is version 2 and includes the new color code...

Replacement tubing for the Rena XP Filters consists of two, 5 foot lengths. These are the original tubes that come with the XP1, XP2 & XP3. They will also fit the XP4....

Original replacement motor for the Rena Filstar XP2 and includes a canister Oring and impeller cover seal . It does not include the Quick Disconnect Unit or rotor/impe...

Original replacement motor for the Rena Filstar XP3 and includes a canister Oring and impeller cover seal. It does not include the Quick Disconnect Unit, rotor/impelle...

Original replacement motor for the Rena Filstar XP4. Includes a canister Oring and impeller cover seal. It does not include the Quick Disconnect Unit, impeller cover o...

The inlet pipe cap covers the priming tube that is part of the inlet pipe. A loose inlet cap can let air into the intake system which makes priming and restarting the ...

Replacement suction cups for all XP Filter systems made after 2003. Includes suction cups only. No Clips.

These one-way locking clamps will secure the flexible tubing to both the inlet and outlet pipe at one end and the canister tubing barbs on the Quick Disconnect unit on...

Additional SmartFilter inlet extensions can be used to increase the intake length for use in deeper tanks.

Additional SmartFilter inlet extensions can be used to increase the intake length for use in deeper tanks. Old Item #841562-00

The inlet strainer attaches to the inlet extension and prevents gravel and other debris from clogging the filter. It is recommended to mount the strainer no closer tha...

These are the original suction cups and clips (KeyCodes K&L)that come packed in the trays with new XP filters. Now packed in a convenient 6 pack (6 cups, 6 clips).

This is original multi-language manual included with all Filstar XP filters. These manuals are not specific to each model but the instructions for setup are the same f...