Rena Flow Parts

This round nylon bristle brush is ideal for cleaning inside most magnetic drive pumps with removable rotor/impeller. The bristles are designed to remove algae buildup ...

Replacement inlet piece for Rena Flow 300 series pumps with dial flow control.

This dial regulates the flow on Rena Flow 300 series pumps.

Replaces all discharge tubes on Rena Flow 300 series pumps including 705A, Pond Care 80, Rena Flow 300S / 300C / 300B /300S-IL and others. 3/8" outer diameter.

Last Chance This pump base will fit many older classic Rena Pumps and the newer Rena Flow series pumps. This includes Rena Flow 300 /600 / 600IL / RF900S / RF900S-IL /...

Ceramic replacement shaft fits all of the larger Rena Flow models including Rena Flow 4000, 6000 and the Pond Care models 850 (item 705K), 1250 (item 705L. Purchase th...

Replaces all discharge tubes on Rena Flow 600 series pumps including 705B, Pond Care 160, Rena Flow 600S / Rena Flow 600SB / Rena Flow 600C / 600B / RF600S-IL and othe...

Impeller cover and grill intake for Rena Flow 900 and Rena Flow 1100.

Impeller cover with tubing intake and discharge mounted flow control for Rena Flow 900 and Rena Flow 1100.

Factory orginal impeller cover Oring which fits the Rena Flow 1500/2000 and Pond Care 350/450. Replace if lost or torn.

The ADE300-06 pre-filter foam is approximately 3/8" thick x 1-1/4" Diameter. For use with Rena Flow fountain/pond/aquarium models requiring a round disk-type filter. T...

ADE600-04 strainer is used with the pre-filter foam AP6837. Approximately 2-1/4"L. For use with Pond Care fountain/pond pump item number 705B Rena Flow models RF160/RF...

The ADE600-03 pre-filter foam is approximately 3-7/8"L x 1-1/4"D and is used with strainer AP6837. For use with Pond Care fountain pump item number 705B Rena Flow mode...

Small suction cup feet for many Rena Flow and Classic Rena water pumps. Will fit all model versions of Rena series 10 / 15 / 25 / 20 / 20 Vario / 40 / 40 Turbo. Fits a...

This pre-filter foam is approximately 5 1/8"L x 4-1/8"W x 4-1/8H. This is an excellent substitute for AP6859 now discontinued. For use with all Pond Care pond pumps it...

The bearings/bushings attach to either end of the rotor/impeller shaft and hold the shaft tight and centered in the rotor/impeller chamber. These bearings will fit man...

This ceramic shaft replaces the shaft found on older discontinued Rena models including the 15 and 20 models.

This rotor/impeller assembly with fit all Rena model 20 pumps and return the pump to optimal performance for flow and lift.

This pump base will fit many older classic Rena Pumps and the newer Rena Flow series pumps. This includes Rena Flow 300 /600 / 600IL / RF900S / RF900S-IL / RF1100S-IL ...

This Oring is used to seal the impeller cover of the 40/40 Turbo/900/1100 to the front of the pump and make the rotor/impeller chamber water tight. Made of EPDM rubber...

This O'ring is used with the impeller cover to seal the rotor/impeller area of Rena S60/J60 and C60 pumps.

This pre-filter is the most permanent and economical pump pre-filter we offer. It will fit the Rena Flow or Pond Care models including RF350, RF450, 705C (350), 705D (...

Replacement intake for use with Rena Flow 80 and Pond Care 705A Rena Flow 300S-IL.

Discharge mounted flow control for use with Rena Flow 300 / Pond Care 80 / PC 705A and Rena Flow 600 pumps / Pond Care 160 / PC 705B.

Replacement intake for use with Rena Flow 160 and Pond Care 705B Rena Flow 600S-IL.

This rotor/impeller fits the Rena Flow 1100, 900 and many clasic rena pumps including the S40, C40, S40T now discontinued. Flow may vary slightly =/- 10% from the orig...

This rotor fits the Rena Flow 1500 pump UL MOD# M2(S). In addition, it will also fit the Pond Care 350 item 705C. The assembly consists of stainless shaft, bearing/bus...

This rotor fits the Rena Flow 2000 pump UL MOD# M2(S). In addition, it will also fit the Pond Care 450 item 705D. The assembly consists of stainless shaft, bearing/bus...

This rotor fits all model Rena Flow 300 pumps including RF300B/RF300C/RF300S/RF300S-B/RF300S-IL and Pond Care 80 item# 705A. UL MOD# P300A

This rotor fits all model Rena Flow 400 pumps including RF400B/RF400C/RF400S/RF400S-B/RF400-9V and Pond Care 95 item# 705G. UL MOD# P400A.

This rotor fits the Rena Flow 4000 pump UL MOD# M3(S). In addition, it will also fit the Pond Care 850 item 705K. The assembly consists of ceramic shaft, bearing/bushi...

This rotor fits the Rena Flow 6000 pump UL MOD# M3(S). In addition, it will also fit the Pond Care 1250 item 705L. The assembly consists of ceramic shaft, bearing/bush...

Original factory replacement rotor for Rena model 10 pump, all versions and Rena model 25 all versions. These pumps are now discontinued.

Discharge mounted flow control for use with Rena Flow 900S and Rena Flow 1100S. Will also work with Rena Model 40 and 40 Turbo Pumps.